FreeBSD-10.1 Soekris r276913

I usually work on a Macbook, and I use keyless ssh with a cron job to do nightly backups.  It works very well.  However, I decided to try backups with Time Machine, using my FreeBSD-10 server as the host. The first step is to install netatalk3, and nss_mdns pkg install netatalk3 pkg install nss_mdns avahi…

Available here.    

The FDT file for Raspberry Pi, declares UART.  I’ve had quite a bit of trouble understanding how declaring a uart in the FDT results in /dev/tty0 and /dev/cuau0 appearing in /dev/ Here are the relevant lines from the FDT: uart0: uart0 { compatible = “broadcom,bcm2835-uart”, “broadcom,bcm2708-uart”, “arm,pl011”, “arm,primecell”; reg = <0x201000 0x1000>; interrupts = <65>;…

Crochet-BSD is a github project which supports building FreeBSD disk images for various platforms such a RaspberryPi, BeagleBoard and others.  I had a Soekris 4501 laying around, so I decided to extend Crochet to build images for it. So, firstly, I needed a kernel.  Building the kernel config for Soekris is explained pretty well here….

How the FDT works In specific, I’m looking at this file bcm2835.dtsi which contains the hardware definitions for the BCM2835, the SOC which powers a Raspberry Pi. Primarily, i’m interested in how to read it.   To really make sense of this, you should have this pdf at hand; it’s the hardware manual for BCM2835.  If…

Adding Wandboard support to Crochet-FreeBSD has been a project of mine for a while.  After this fascinating kernel fix, I can now build a working image and boot FreeBSD-Current.   Here is an example boot log, and here’s an image file. The output of dmesg, with a USB wireless adapter in the board, is: KDB:…